# Tricky Data Sufficiency Questions: Explanations #3 and #4

Today, we present the explanations to questions #3-4 from our Tricky Data Sufficiency Questions challenge post. You can find the explanations to questions #1-2 here. Let’s get started.

## Question #3

3. If 2x = 2y – 3z, what is the value of z?

(1) y = x + 2
(2) x = y – 2

(A) Statement (1) ALONE is sufficient, but statement (2) alone is not sufficient.

(B) Statement (2) ALONE is sufficient, but statement (1) alone is not sufficient.

(C) BOTH statements TOGETHER are sufficient, but NEITHER statement ALONE is sufficient.

(D) EACH statement ALONE is sufficient.

(E) Statements (1) and (2) TOGETHER are NOT sufficient

(hint)

Whenever the question stem presents you with an equation with multiple variables and asks you to solve for one of them, you should immediately rewrite the equation to find a more useful question.  Specifically, you should isolate the variable you’re asked to solve for and then focus on the expression equal to that variable.

Here’s what that would look like for this problem:

2x = 2y – 3z

Add 3z and subtract 2x from each side of the equation to isolate the z term.

3z = 2y – 2x

Factor the two from the right-hand side of the equation.

3z = 2(y – x)

Divide each side of the equation by 3.z

Because this is Data Sufficiency, ask, “What do I need to know to know the value of  ?” The answer to that question is simply “y -x.”

Turn to Statement (1) and try to isolate y – x.

y = x + 2

Subtract y from each side of the equation.

y – x = 2

Statement (1) is sufficient. Eliminate B, C, and E.

Turn to Statement (2) and try to isolate y – x.

x = y – 2

Subtract x from and add 2 to each side of the equation.

y – x = 2

Statement (2) is sufficient. Eliminate A. The correct answer is D.

## Question #4

4. On each lab that René completed he received either 100 points or 85 points. On how many labs did he score 100 points?

(1) René’s scores for his completed labs totaled 1140 points.
(2) René completed a total of twelve labs.

(A) Statement (1) ALONE is sufficient, but statement (2) alone is not sufficient.

(B) Statement (2) ALONE is sufficient, but statement (1) alone is not sufficient.

(C) BOTH statements TOGETHER are sufficient, but NEITHER statement ALONE is sufficient.

(D) EACH statement ALONE is sufficient.

(E) Statements (1) and (2) TOGETHER are NOT sufficient

(hint)

This problem yields a system of linear equations.

Let the number of labs on which René earned a score of 100 points=x.

The total score for these labs=100x.

Let the number of labs on which René earned a score of 85 points=y.

The total score for these labs=85y.

The total score for all labs=100x+85y.

The question asks us to solve for x.

Statement (1) can be rewritten as 100x+85y=1140.

Statement (2) can be rewritten as x+y=12.

When a DS story problem yields a system of distinct linear equations but implicitly requires that solutions be integers, the smart thing to do is to test values. Generally the numbers involved won’t be very large, so the arithmetic won’t be too daunting.

Statement (1): First, stipulate an integer value for y, then calculate 85y, then subtract that product from 1140. If the difference left isn’t a multiple of 100, don’t consider it further:

Since only one integer value for y yields an integer value for x, and since both x and y must be integers, Statement (1) is sufficient. Eliminate B, C, and E.

Statement (2): Any pair of integers that sum to 12 is a possible pair of values for x and y, so Statement (2) is not sufficient. Eliminate D. The correct answer is A.

Remember to check back on Wednesday for the explanations to questions #5 and #6. In the meantime, you can check your answers here.

### 10 Responses to Tricky Data Sufficiency Questions: Explanations #3 and #4

1. Julia March 1, 2017 at 9:35 pm #

How can we possibly solve number 4 in the short time we have to solve each question? I mean to get the idea that we should test numbers because only one of them might result in a multiple of 100, and then actually complete this table, all in under 2 min?

• Magoosh Test Prep Expert March 1, 2017 at 11:39 pm #

I’m glad you asked this. You’ve raised a very good point about average solve times for questions on the GMAT. You probably can’t solve this question in under 2 minutes. But remember, 2 minutes or so is your average solve time. Some trickier questions will take longer than average, and some easier questions will take less time than average. The trick is to make sure it all evens out to a reasonable amount of time per question overall. Does this make sense?

2. Niyi October 31, 2016 at 4:36 am #

Hi, I want to find out. Why were the 2 linear equations not solved together? If that was the case, we would have still gotten x=8 and y=4 and the answer to the question would be C instead of A.

• Magoosh Test Prep Expert October 31, 2016 at 12:41 pm #

You’re correct that combining the 2 linear equations will also get the vlaues needed to solve the problem. However, this doesn’t mean that the answer is (C). Remember, (C) says that NEITHER statement is sufficient on its own and that the statements only get the answer when you combine them together. But this isn’t the case here, because statement 1 is sufficient on its own. You can combine Statement 1 with Statement 2 to get the answer, but you don’t HAVE to. It’s possible to solve the equation with only Statement 1.

In fact, in nearly any data sufficiency question where (A) is the correct answer, it’s possible to solve the equation with Statement 1 alone OR with Statement 1 and Statement 2 together. But as long as statement B itself cannot work alone, the answer can’t be (C)

3. Jian Liang October 20, 2016 at 8:14 pm #

Hi, I believe you made a typo on the explanation for Question #4, in the table, item 3 should be no (for the column mulitple of 100).

• Magoosh Test Prep Expert October 22, 2016 at 8:50 am #

Hi Jian,

Thank you for your feedback! You are absolutely correct. We will have someone on our Content Team fix the typo. Thanks again!

4. Paul April 23, 2015 at 7:12 pm #

We all make typos. I see one in my misspelling of “equation.”

• Rita Kreig April 24, 2015 at 5:17 pm #

🙂 Thanks for understanding!

5. Paul April 16, 2015 at 5:42 am #

I believe that you made a mistake in your explanation for #4. You used 80y when that term should have been 85y. Consequently, the new eqaution formed should have been 100x + 85y = 1140. Additionally, I have no idea how you came up with the number 940 in your equation.

• Rita Kreig April 22, 2015 at 5:12 pm #

Hi Paul,

Thanks for alerting us to this error! That’s a definite typo. I appreciate your help, and I know other readers will, too! 🙂

Cheers,
Rita

Magoosh blog comment policy: To create the best experience for our readers, we will only approve comments that are relevant to the article, general enough to be helpful to other students, concise, and well-written! 😄 Due to the high volume of comments across all of our blogs, we cannot promise that all comments will receive responses from our instructors.

We highly encourage students to help each other out and respond to other students' comments if you can!

If you are a Premium Magoosh student and would like more personalized service from our instructors, you can use the Help tab on the Magoosh dashboard. Thanks!